Adapt-a-Mill®
Poly Pipe Spinners
Contractor Tripod
Australian Patent No. 2021104209
The Contractor Tripod
There are two available sizes of this Polyspinner model.
The Contractor Tripod 1.6m/2.4m (diameter) will accommodate all standard polypipe coils up to and including 63mm/100m and is rated to carry 250kg.
The contractor Tripod 1.6m/2.7m (diameter) will accommodate all standard polypipe coils up to and including 75mm/100m and rated to carry 300kgs.
These models feature a raised tripod base for stability on uneven ground.
The arms and legs are interchangeable such that the top section can be set up to have either a 1.6m or 2.4m (2.7m) diameter to suit the coil size.
Sliding uprights are positioned against the inside of the coil to keep it secure and centered. The surfaces of the base and hub are separated by a wear washer to provide the 'friction seat' design. This provides some resistance to rotation and thereby reducing the momentum when uncoiling large rolls.
For transport and storage, this model comes with a carry frame to contain the arms , legs and uprights, while the base and hub remain separate.
It weighs approx 52kg (55kg)
CONTRACTOR TRIPOD 1.6m/2.4m
$1275.00
The Contractor Tripod Poly Pipe Spinner comes with 4 arms and 4 legs which are interchangeable to provide a small diameter configuration of 1.6m or a large diameter configuration of 2.4m (2.7m).
It includes all of the poly pipe spinner components, and a carry/storage sleeve which in total weighs approximately 52kg (55kg).
Large Configuration
2.4m (2.7m)
